Taumac SRL Taumark M & TOP

Designed in every detail to meet the most varied needs and applications of laser marking, deep engraving and cutting thanks to the wide range of laser sources available.

The large working chamber also allows the use of 3D marking technology for complex shapes and 2.5D for the creation of excavations or cones for molds.

It is possible to combine with the machine an integral vision system.

The TAUMARK M and TOP laser markers have been designed in the smallest details to satisfy a wide variety of needs and applications of laser marking, deep engraving and cutting thanks to the wide range of laser sources that can be inserted. The large working chamber also allows the use of 3D marking technology for complex shapes and 2.5D for the creation of excavations or cones for molds.

You can combine with the machine an integral vision system that makes this model even more efficient, productive and precise with excellent results.

The possibility of the integration of a motorized base allows a comfortable and ergonomic use.

The wide range of sources proposed according to customer needs makes this product truly complete.

Taumark M & TOP series

The TAUMARK M and TOP laser markers have been designed in the smallest details to satisfy a wide variety of needs and applications of laser marking, deep engraving and cutting thanks to the wide range of laser sources that can be inserted. The large working chamber also allows the use of 3D marking technology for complex shapes and 2.5D for the creation of excavations or cones for molds.

You can combine with the machine an integral vision system that makes this model even more efficient, productive and precise with excellent results.

The possibility of the integration of a motorized base allows a comfortable and ergonomic use.

The wide range of sources proposed according to customer needs makes this product truly complete.

Strengths

  • wide opening door (450mm)
  • inclined opening door for a better viewing of the working point
  • large working area (550x500mm) also useful for future additions
  • care in the design of the interior spaces for a better recovery of the metal
  • innovative push-pull suction for laminar air flow
  • professional multilingual software that can be parameterized by the operator and company
  • import of the most popular file formats from technical software and wide window for internal viewing
  • large stroke (400mm) of the Z axis to be able to integrate future automations
  • controlled and precise «Z» axis 
  • fine red pointer for file centering

Technical features

POWER20W 30W 50W 70W 100W
FREQUENCYfrom 1 to 2000 KHz
WAVE LENGHT1064+/- 4nm ( CO2, Green and UV sources available)
FOCUSING LENSESF100(60x60) F160(100x100) F210(140x140)  F254(170x170) F330(230x230) F420(280x280)
TESTA 3D(200x200x100) o (300x300piano) o (400x400 piano)
RED DIODE LASER FOR FILE CENTERINGlaser diode 650nm 2 mW
PC CONNECTIONUSB 2
COOLING SYSTEMforced - air cooling
WORKING CHAMBER560x560 mm door opening size 450mm
TEMPERATURE RANGE10-35C° / 30-85% humidity
WEIGHT AND DIMENSIONSM Series 650x1050x750mm 120Kg 
TOP Series 650x1050x1900 200Kg
POWER SUPPLY230V +/- 10% 50/60 Hz  400 - 900 W

Accessories

Equipped with pre-filter and HEPA H13 filter and 5Kg active carbon.

It can be combined with a cyclone for dust recovery. It's interfaced with the laser marking, it switches on and off automatically.

Equipped with internal cyclone and HEPA filter.

Interfaced to the laser marking, it turns on and off automatically.

MANUAL: the operator positions the ball between the 2 tailstocks.

AUTOMATIC: a vibrating system selects the ball and an automatism places it between the 2 tailstocks.

Both systems work for positioning angle R and B.

They can be applied to markers, with either large or smaller focal lengths to better optimize the processing cycle and the marking area.

Eyeglasses are mandatory for any work with the class IV laser (open laser)

The mandrels are used to take round pieces like posts. The 50 diameter is always provided with magnetic socket, vice versa the 80 diameter is locked with screws due to its ability to grip the piece.

A single gripper to take rings or tubular elements both internally and externally.
Removable pliers for easy processing checks.
Zero sensor for correct cycle repetition.
Two systems of free inclination or fixed stop.

Same features as the manual version, but with automatic tilt. This allows external/internal marking without the aid of the operator.

The dedicated software positions the laser focus automatically when changing the diameters of the rings.

(on S series, only for S + model)

This allows the application of the national brand "Italia Turrita" with laser technology, by the ISO / IEC 17025 accredited bodies, ensuring the compliance of jewellry products in markets belonging to the European Union. This legislative change will allow companies to guarantee to its European customers the compliance of their products with the legal requirements avoiding further controls by the Control Bodies of the destination countries.

(on S series, only for S + model)

Following the Italian legislation this software allows to affix the trademark after having made a request to the competent Chamber of Commerce.


(on S series, only for S + model)

Accessory to block plates or round pieces for small productions.

It is self-centering with maximum 100mm opening. Two versions of 100 or 200mm are available

Easily interchangeable with the ring pliers thanks to the magnet socket. It has a precision reference to allow repositioning.

Socket bracelet both inside and outside.

Economic alternative to the probe.

It leads to a tolerance of +/- 0.2mm.

Fits well when the pieces are not mirrored.

Ideal accessory for centering the marking on the pieces.

Much more defined than the classic red rectangle. In the MANUAL version it is always the operator to place the file on top of the piece.

In the AUTOMATIC version the camera takes care of positioning the file to mark on the pieces. The vision is always live.

(in the S series, only for S + model)

Necessary for the creation of cones or work on flat and curved pieces.

The dedicated software automatically creates the sections (layers) set by the operator.

When combined with the 3D head, it does not perform any mechanical movement, to always work in focus.

This accessory solves all the problems encountered when it is necessary to mark inside a ring with stones that does not need any automatic rotation.

It brilliantly replaces the plasticine.

Indispensable for the piece height measurement.
Reading value from 40 to 140mm.
Automatically launches the «Z» axis to the value detected for the S+, M, and Top versions. On S version  only detects the quota.

Accessory for medium productions.

It's possibile to work with pieces placed on fixed positions, or with the aid of the camera, freely placed in a predefined work area.

Work area visualization camera.

Used to control the processing cycle.

Innovative marking head that combined with the specific TAUMAC 3D software allows to perform markings on curved and irregular surfaces.

It requires an STL file of the part you want to mark.

Accessory for large productions of marked and cut objects. It has a particular suction that keeps the work area clean. Compared to other accessories, the cutted pieces do not position themselves between the clamping clamps. Dedicated software for programmable and very flexible cuts management.

(in the S series, only for S + model)

Other products

Marking and micro-cutting laser
Taumark S / S+ Discover
Marking and micro-cutting laser
Taumark XS Series Discover
Marking and micro-cutting laser
Taumark W Series Discover
Marking and micro-cutting laser
Taumark S-Open Discover
Marking and micro-cutting laser
Discover

Contact us

Contact us for more information or an immediate quote